Shelves for rubber maid bins - done - Thanks Ryan for the help and to whomever gave it the nice paint job!
Wood Corral - 24/06/2012 - Thanks to Ryan for helping out
In Progress
Reprap - needs extruder and hot end wired up
23/06/2012 - Spindle built
24/06/2012 - Extruder mounted
29/06/2012 - mount reprap to spindle
7/07/2012 - wire up extruder and hotend
todo - rewire power to include switch and mounting for DIN plug
29/06/2012 - version 2 spindle/mount (lower profile, easier loading and unloading of spindle)
Door Control System (w/ RevEng, Kaldonis and Drostar)
done - Arduino/Sheeva Plug
abandoned - switch to RSPro - could not get kernel patch to enable GPIO interrupts to work
todo - Switch to RPI (direct to GPIO) RPI is in my bin needs new OS image
todo - UPS
todo - admin interface
Buzzer plate
done - design plate
todo - cut plate
todo - wire and test
Dinning Room Chairs
done - design (using slightly modified design from magazine)
todo - pickup wood (windsor plywood)
todo - CNC pieces
todo - assemble
todo - finish
RPI in NV-11 vacuum
...
Mobile Geese
todo - digitize
todo - cut
todo - paint
todo - assemble
I keep loosing track of projects through delays etc. So created this so I and anyone else can track the progress of all my projects. Feel free to encourage me to finish things. Or tease/abuse me for not finishing things.
