Saskatoon TechWorks Forum

This will be used as the baseplate for a 1lb combat bot. No idea how well it will work, but the event is 3 weeks away so we'll find out then!

Resolution: 0.3mm
Fill: 40%
Time: ~6 hours

https://www.dropbox.com/s/xytntoueco0wjpg/IMAG0007.jpg
https://www.dropbox.com/s/zyrovo548zef1 ... .26.52.jpg

This was an earlier version but suffered from delamination and IMO was too thin,

https://www.dropbox.com/s/xxt7660kf0yjk ... .21.25.jpg