Saskatoon TechWorks Forum

So I'm placing an order and this is the list i have from you guys so far:

Props:
Jeremy Rans: 2x 7x3.5 prop sets
Jeremy Rose: ""
Jordan:""
Bergo & me: 10x 8x5 prop sets
James: 2x 6x5 Prop Sets

Other:
Bergo: turnigy talon2 frame, 5 cf2822 motors
Paul: ""
Jordan: one of the 400mm frame kit motors
10 low voltage buzzers
Rans & Rose: HKC6 charger

What else?

Put me down for the following:

2x low voltage alarms (if not included already)
6x fc 28-12 motors
1x Prop Saver w/ Band 3mm (10pcs)
2x 7060SF combo (both standard and counter)
2x PolyMax 3.5mm Gold Connectors 10 PAIRS (20PC) ( I think this is what we got last time)

I think that's it.... for now.

Put me down just for this stuff instead of what you currently have me down for.

1 x Talon v2.0
5 x Turnigy fc2822
10 x 9x5 prop sets
2 x Bullet connectors
1 x Prop Savers
2 x Low voltage alarm
1 x HKC6 Charger
1 x Charging Lead set
1 x T-Connectors (battery connectors)
1 x Lipo Safe Sack

Which works out to 155.38 before whatever conversion/taxes there are.

i dont know if the 400mm frame motors are the same as the 550mm frame motors, but it's the 550mm frame i have and require a new motor for

I don't wanna mess it up, maybe let me know exactly which ones you want?

That's a good idea.
Please add a lipo safe bag to my order also.

here are the motors:


2200kV PM19M-2400:



2800kV PM19S-2800:



and the motor from my 550mm kit:



looks to me like i need a 2200kV PM19M-2400. and 3 prop packs

was this all ordered yet? if not, I should get one of those lipo charging sacks as well. Also, I think we need prop saver adapters for our motors Paul.

Good catch. Order is going today, last call!

Order Placed, but some bad news. James and Jeremy Rose, your props weren't in stock so I didn't hold out for them